Manufacturing Engineer III

Benefits

• Medical (free employee only coverage and low-cost options available)
• Dental, Vision, Prescription
• Life and AD&D Insurance
• Company Sponsored 401k with Employer Match
• Employee Assistance Program
• Wellness Program
• Tuition Reimbursement
• Employee Discounts
• 8 Paid Holidays plus closed (with pay) for a week during the winter break!
• 15 days per year accrued Vacation/Sick time. Accrued time is available to use immediately!
• Uncapped Employee Referral Program of up to $700 per qualified referral

Summary

The Manufacturing Engineer is responsible for development and improvement of composite part fabrication processes, methods, and tooling. Position may include design of tools, shop floor manufacturing support, process development and introduction of new products, as well as providing leadership to ME team members.

Required Qualifications

• Detailed understanding of GD&T.
• Experience in Work Instruction creation.
• Proficient in verbal and written communication skills; able to prepare technical documents for customers.
• Composite part fabrication experience.
• Implementation of continuous improvements by the use of Lean, Six Sigma, Kaizen methods.
• Reviewing drawings, models, engineering specifications, orders, and related information to obtain knowledge of manufacturing methods, procedures and activities.
• Establishment of sequences of operations to fabricate and assemble composite products that promote efficient utilization of equipment and labor.
• Implementing and improving new manufacturing processes.
• Experience with composite process and specifications of thermoset and/or thermoplastic parts and structures.
• Experience in establishing qualification plans, in order to qualify processes and equipment to the customer specifications.
• Capable of designing or defining the requirements for the development of equipment, robotics, Lay-up molds, Vacuum Holding Fixtures, Shop Aids, Positioning fixtures, Go-No-Go inspection tools required for the manufacturing of new products.
• Capable of performing safety, failure mode and effects analysis (FMEA), Process Capability and Total Product Maintenance (TPM) for new and existing equipment.
• Understanding basic industrial engineering practices, such as, time studies, statistical analysis, ergonomic impacts, and value engineering principals.
• Ability to lead and mentor others.
• Responsible for leading multidiscipline teams in projects of significant impact to the company's objective.
• Ability to perform with little to no supervision.

Preferred Qualifications

• Ply shape flat pattern development.
• Tool Design experience.
• Knowledge of Boeing and Airbus process and specifications.
• Familiar with composite autoclave or oven curing cycles, thermal profiles, recipes, thermal effects, thermal expansion, wrinkles and tooling spring back effects.

Education

Bachelor's Degree in Manufacturing or Mechanical Engineering or related field preferred.

Experience

• Degreed applicants: minimum of 10 years of experience in composites aircraft industry in related field is required.
• Non-degreed applicants: must possess 15+ years' minimum experience directly related to the duties and responsibilities specified in this job description.

Computer Skills

• Experience with Catia V5, Inventor, Solid Works, or other 3-Dimensional CADs required.
• Skilled in MS Word, Excel, PowerPoint, Project.
• Epicor experience or equivalent ERP system.

Working Conditions

While performing typical duties of this job, production employees will experience the conditions noted below. PPE is provided to protect employees against physical harm or hazards in the workplace environment.

• Extended periods of sitting at a desk in an office environment.
• Usually work indoors. These sites may not be temperature-controlled.
• Exposure to loud sounds and distracting noise levels.
• Exposure to hazardous equipment.
• Exposure to contaminants.
• Shared workspaces with other employees.
• Requires handing objects of up to 50 lbs.
• Lifting pushing, pulling, and bending.
• Standing and/or walking for 8 to 12 or more hours per day (varies based on role, shift and overtime).

Working Conditions

While performing the typical duties of this job, employees will experience the conditions noted below. PPE is provided to protect employees against physical harm or hazards in the workplace environment.

• Usually work indoors. These sites may not be temperature controlled
• Exposure to loud sounds and distracting noise levels
• Exposure to hazardous equipment
• Exposure to contaminants
• Shared workspaces with other employees
• Requires handling objects of up to 30 lbs.
• Lifting, pushing, pulling, and bending
• Standing and/or walking for 8 to 12 or more hours per day (varies based on role, shift, and overtime)

Required PPE (Personal Protective Equipment)

Required PPE provided by SEKISUI Aerospace based on the employee's position and exposure. Below are typical PPE used on the production floor. Appropriate PPE must be worn by all employees when on the production floor.

• Ear Plugs - Earmuffs
• Full Face Shield
• Gloves (Latex, Rubber, Chemical Resistant, General Duty)
• Protective Apron
• Respirator
• Safety Glasses - Safety Goggles

Other Duties

This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice.

Learn more about us here:https://www.sekisuiaerospace.com/about

View all our job postings here:https://www.sekisuiaerospace.com/careers

Pre-Employment Drug and Background Screenings

SEKISUI Aerospace is a Drug-Free workplace. Pre-employment drug screen required.

Any applicant selected for this position will be required to submit to a background screening.

Affirmative Action / Equal Opportunity Employer

SEKISUI Aerospace provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

People with Disabilities

SEKISUI Aerospace is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact the human resources department at the appropriate SEKISUI Aerospace manufacturing site.

Please call if you need an accommodation:

Renton Operations, Corporate Headquarters: 425-235-2750

Sumner Operations: 253-863-7868

E-Verify Statement

SEKISUI Aerospace is a federal contractor and is required to participate in the federal government's E-Verify program. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With respect to new hires, the E-Verify process is completed in conjunction with a new hire's completion of the Form I-9, Employment Eligibility Verification within three days of starting employment. For information regarding E-Verify, visit theE-Verify site.

Our Values

The employees of SEKISUIAerospace enjoy what we do and are dedicated to our seven corporate values. We promise to hold ourselves to these high standards and seek co-workers who are willing to join us in this task.